Classification of resin abrasives

grinding wheel is a grinding tool that is not often seen in the grinding process. Its manufacture is usually made by inserting a foot separating agent in the grinding evaluation, and is made by compacting, drying and roasting. Its personality parameters mainly include abrasive, viscosity, shape, hardness, separating agent, size, etc.
Due to the differences between abrasive, separating agent and creation process, the difference between the grinding wheel pieces made after all is also relatively large, so that abrasive, separating agent and creation process have a tense influence on the processing quality and yield of grinding. Classification of
grinding wheel:
grinding wheel according to abrasive, grinding wheel can be divided into common abrasive (corundum and silicon carbide, etc.) grinding wheel, artificial abrasive superhard abrasive and (diamond and cubic grinding wheel boron nitride, etc.) grinding wheel;
According to the shape, grinding wheel can be divided into flat grinding wheel, cup grinding wheel, cylindrical grinding wheel, bevel grinding wheel, disc grinding wheel, etc.;
is divided by agent, grinding wheel can be divided into metal grinding wheel, rubber grinding wheel, resin grinding wheel, ceramic grinding wheel, etc.
cutting piece refers to the thin sheet made of abrasive and separating agent resin for cutting popular steel, stainless steel metal and non-metal materials. It mainly uses glass fiber and resin as strengthening separation materials and has the personality of high tensile, impact and bending strength. Therefore, it is widely used for the production and blanking of popular steel, stainless steel metal and non-metal.
According to the material to divide, cutting piece is mainly divided into fiber resin cutting piece, diamond cutting piece.
Among them, the former resin is therefore a separating agent, which blends glass fiber mesh with various materials, and can complete the cutting of strong materials such as alloy steel and stainless steel. The function is very obvious, and the cutting accuracy is not disorderly, which can greatly improve the cutting efficiency and save money. Its cutting forms are dry and wet.
and diamond cutting piece mainly used in stone, new and old road, precast plate, concrete, ceramics and other hard brittle material cutting. It mainly includes the base body and the cutter head. The matrix is the primary support of the bonded cutter head. If the cutter head plays a cutting role, since the cutter head contains diamond, as a hard material now, diamond can cut the processed object ineffectively. The cutter head will be consumed in the process of application, but the matrix will not.
grinding sheet is made by planting fine abrasive grains (alumina or silicon carbide) on high-strength polyester film with the help of low-voltage electrostatic field force, so that all the sharp knives of sand grains face outward and cut sharply, which can provide higher grinding effect and smooth and rough polishing effect, and then processed through back velvet and cutting. The abrasive particles of
polishing sheet are arranged in a directional manner, and the appearance of the product is sharp to ensure good grinding effect of the abrasive belt. The abrasive particles on the surface of the product are evenly distributed, and the special binder is separated to prevent deep lines and unspecified lines. At the same time, it has excellent chip removal power and is not easy to jam.